er-sawed oak should be usedin its construction, and the following pieces will beneeded: 4 legs, 2 by 2 by 20 in., S-4-S.4 end slats, y2 by 2 bv 10 in., S-4-S.1 shelf, 1 by 16 by 30 in., S-l-S.1 top board, 1 by 18 by 36 in., S-l-S. If you are convenient to a planing mill you can se-cure these pieces… … Table Complete ting. The mortises for the shelf should be cut 9 in.from the top of each leg, as shown in the sketch. Careshould be taken to make these a perfect fit. The shelf should be finished on the top side andthe four edges, and the corners cut out to fit the mor-tises in the table legs. An…
Furniture making · Desks · Desk accessories · Dining tables and chairs · Decorative crafts · Beds · Clocks
Internet Archive · Building Technology Heritage Library · Public Domain Mark 1.0. Free to use for anything.
