Analysis of paint vehicles, japans and varnishes (1920)
Holley, Clifford Dyer · New York : J. Wiley ; London : Chapman & Hall · leaf 30
gler flask, described below, the bulb and neck being turned in one piece. Saw the model into halves from top to bottom. Hol- low out the neck and bulb to form a shallow dipper, making the cavity about 1 cm. deep and leaving the rim about 3 mm. thick. Drill holes the size of small wire brads 1 cm.… … Fig. 1. — Construction of Heater A standard Engler flask of the capacity and dimen- sions specified in Fig. 2 should be used in designing the model, and particular emphasis should be used in specifying these flasks when ordering from the sup- ply house, as the so-called Engler flasks, listed in…
Paint · Japanning · Varnish and varnishing
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.
