Cotton manufacture: a manual of practical instruction in the processes of opening, carding, combing, drawing, doubling, and spinning of cotton, and the methods of dyeing and preparing goods for the market (1894)
Lister, John, 1920- · London, C. Lockwood · leaf 142
two discs by 10 ; as anexample, if the numbers were 375 and 18, these added equal 393,which, divided by 10, gives 39 teeth required. Before the secondsection is commenced, this change wheel is put on and geared by 128 COTTON MANUFACTURE. means of an intermediate or carrier wheel, and the toothed… … turning the discs to the position required, and replacing the carrierwheel. The two sectors are then securely bolted together by thescrew, and all other sections can be run off. No further alteration isrequired so long as the same sections are made, whatever may bethe amount. Finally, the screw of…
Cotton manufacture
Internet Archive · UMass Dartmouth, Claire T. Carney Library · Public Domain Mark 1.0. Free to use for anything.
![An illustration from The Mason Machine Works, Taunton, Massachusetts, U.S.A., inventors and builders of cotton machinery : Founded 1842 ; Incorporated 1873 ; [Catalogue] (1898)](https://img.insideoutlibrary.com/img/200/ia-masonmachinework00maso-267-66.webp)
