The blacksmith's guide : valuable instructions on forging, welding, hardening, tempering, casehardening, annealing, coloring, brazing, and general blacksmithing (1907)
Sallows, J. F. (James Francis), 1865- · Brattleboro, Vt. : The Technical Press · leaf 66
TOOL FORGING 53 has been turned. Fig. 27 shows the process of turning the lip over the round part on the anvil face. The lip on the boring tool should be made in the shape of a hook for turning tool steel, machine steel or wrought iron, as in Fig. 28. The hook can be formed by using … the bottom fuller, as in Fig. 29. If boring tool is for brass the lip should have no hook, but should slant slightly from heel to point. Figs. 30 and 31 show the cutting parts for a brass-cutting tool. The advantage of having round corners along part of the front and back edges of the anvil is well…
Blacksmithing
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.
![An illustration from The Telegrapher [microform] (1864)](https://img.insideoutlibrary.com/img/200/ia-telegrapher04nati-65-29.webp)
