Leonard, Anna B, Robineau, Adelaide Alsop, 1865?-1929 · Syracuse, N.Y. [etc.] : Keramic Studio Publishing Co · leaf 33
y. Lay successiveh each corner of the bottom sheet above the holeand gently drive the metal into it. This will make foursmall hemispherical feet, to raise the box above whateverit is set on, and keep the corners from scratching. Eachcavity is then filled with solder. The laps are beaten into shape… … tom piece was made. A strip is cut for the inner sides butno lap left on the upper edge. A lap is left on one end,Fig. 19. Fit the outer and inner covering in place and when thevare ready, remove and tin all joints and laps that are tobe soldered. This is done by carefully heating the metal…
Pottery · Decoration and ornament
Internet Archive · Smithsonian Libraries · Public Domain Mark 1.0. Free to use for anything.
