Miller, Charles M · Peoria, Ill. : The Manual arts press · leaf 126
in cross-section FIG. 238. as the forward piece, but is 8" long and is secured in the same manner as the other, see Fig. 234. The framework is further stiffened by two fine wires that run diagonally from the ends of one cross-piece to the ends of the other. They are secured to the inside vertical… … shafts are lashed to the outside face of the rear end of each spine, Fig. 236. The bearing is a piece of brass 3y/xi"xl" ') and is bent to a right angle at the middle. A small hole
Kites
Internet Archive · New York Public Library · Public domain (published before 1931). Free to use for anything.
![An illustration from [Electric engineering.] (1902)](https://img.insideoutlibrary.com/img/200/ia-electricengineer03inte-387-245.webp)
