Model making; including workshop practice, design and construction of models, a practical treatise for the amateur and professional mechanic .. (1919)
Yates, Raymond F. (Raymond Francis), 1895- ed · New York, The Norman W. Henley Pub. Co. · leaf 299
countersunk screws maythen be drilled and tapped and the plate permanently 296 Model Engineering secured to the motor frame. If the work has been Honecarefully the motor shaft will turn without any bind whenthe plate is secured. The bearings for the transmission shafts next requireattention. These… … Fig. 206—One of the propellers used on the submarine of the plate and the under side of the bearing coatedwith soldering paste. A very hot soldering copper wasthen used to flow solder around the joint, care being takento see that the solder actually sweated into the joint be-tween the bearing and…
Machinery
Internet Archive · Public Domain Mark 1.0. Free to use for anything.
