about halfan inch into the other. Now by putting the pin throughthe hole, it will be filled and make an accurate andworkmanlike job. If brass pins are used, this could notbe done, because the pin would not fill the hole; and asthe pin and its tube are of a different size, the hole couldnot be bored… … Oliver^ ^ Bandsaw CHAPTER X. PI.ATK WORK AND IRREGULAR PARTING The next example to be taken up is typical of a quitelarge class of pattern - work,generally known as plate work.It is usually comparatively thin in cross-section in at leastone direction. This class of work includes shafting,hangers of…
Patternmaking
Internet Archive · Library of Congress · Public Domain Mark 1.0. Free to use for anything.
