Verrill, A. Hyatt (Alpheus Hyatt), 1871-1954 · New York, Dodd, Mead and company · leaf 128
as nearly the same diameter as theend of the upright as possible (Fig. 13). Intothis hole fit a round peg with the projecting endthe diameter of the hole in the back of the chairand glue it firmly in both the upright and the back. CARPENTRY ABOUT THE HOUSE 111 Still another common break in chairs… … as in Fig. 15, and then fit two pieces of woodinto the space around it as shown in Fig. 16.These pieces should be glued in position and re-inforced by fine finishing nails run through bothpieces and into the seat of the chair beyond.When thoroughly dry the ends and edges shouldbe smoothed off and…
Carpentry
Internet Archive · Library of Congress · Public Domain Mark 1.0. Free to use for anything.
