The pattern maker's handybook : a practical manual on patterns for founders, embracing information on the tools, materials and appliances employed in their construction (1887)
Hasluck, Paul N. (Paul Nooncree), 1854-1931 · London : C. Lockwood · leaf 86
linder, so that its bevel forms a tangent to the cylinder, it cannot cut the material j but directly the handle is raised the cutting edge is depressed into the cylinder, and all that material lying outside of the diameter of the edge is removed. The position of the cutting edge is best determined… … Fig. 48. Cutting Angles of Tools. keeping it resting on the cylinder, till the edge reaches the point at which it forms the tangent, and then it commences to cut. By slightly tilting the tool, the edge is brought to act on a smaller diameter, and turnings are removed under the most advantageous…
Patternmakers · Patternmaking
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.
![An illustration from [Electric engineering.] (1902)](https://img.insideoutlibrary.com/img/200/ia-electricengineer04inte-419-186.webp)
