Radford's cyclopedia of construction; carpentry, building and architecture. Based on the practical experience of a large staff of experts in actual constrcution work (1909)
Johnson, Alfred Sidney, 1860-, Radford, William A., 1865- · Chicago Radford Architectural Co · leaf 322
ter on. After the treads andrisers are laid out on the string, a sharp pointedknife blade should be used to mark the hnes for the PRACTICAL CARPENTRY 283 face of the riser and top of tread, then a fine tenonsaw should be used to saw down to the exact depth.This will not be difficult to perform when… … Fia. 245 wood from the grooves that too much is not takenor the grooves made too deep. A gauge for tryingthe depth may be made out of a piece of hard wood,say about four inches long and three inches wide,by about one-half inch in thickness. Make atenon on the center of one end, about…
Architecture · Building
Internet Archive · Gerstein Library, University of Toronto · Public Domain Mark 1.0. Free to use for anything.
