his for the drivers seat. Nowglue the front, g, to the postsE D (Fig. 248), and the blockH to the bottom. Two cardboard seats, cutas in Fig. 251, should nextbe fastened by paper hingesto the inside of g.^ ^^° To make the top of the cab cut a piece of cardboard, 4| inches by 3 inches (Fig. 252).… … TOY-MAKING IN SCHOOL AND HOME 135 Acardboard seat about 1 inch wide is glued to the block h for thedriver. The sides of this seat (m in Fig. 248) are made of piecesof wood, 1| X 1 x|, one corner being rounded as in the figure,and they are glued to each side of the block h. Two pieces of caneshould…
Toys
Internet Archive · University of Toronto, Robarts Library · Public Domain Mark 1.0. Free to use for anything.
