Woodwork for the grades, for use in manual training classes; fully illustrated with three hundred half-tone engravings from actual shop practice, and many working drawings of educational shop problems (1913)
Selden, Frank Henry · Chicago, Orr & Lockett Hardware Co · leaf 97
have so littleuse for a large one thatyou had better work thepiece without the gaugeif yours is too short. Laythe piece on the bench,and mark the width at each end as shown in Fig. 119. If youhave a straight edge, you can draw a pencil line from mark tomark. This will be necessary if you are to rip… … Fig. 118— Cross Planing WOODWORK FOR THE GRADES 95 Next gauge the thickness of the board and dress the oppo-site side. In working such pieces where usefulness is notimpaired by variation in thickness it is usual not to be particu-lar to make them the exact thickness the drawing calls for, butto set…
Woodwork
Internet Archive · Library of Congress · Public Domain Mark 1.0. Free to use for anything.
