n due to the tool entting in the center by chucking the core by the ends of the teeth plate is now ready to be drilled to receive the little lathe. They had perhaps better be all cut at the same screws which support the blocks which mount the time, using ten pieces of the pipe slipped on in the in… … 2 inches and be about 2 inches in length. A couple of layers of linemnan’s insulating tape wound around the resulting curved cut will be everything but attrac- single cut inthe center is made. Useasharp tool and the pulley in even layers makes the most excellent tive in appearance. cut out a one…
Internet Archive · Public domain (published before 1931). Free to use for anything.
![An illustration from [Electric engineering.] (1902)](https://img.insideoutlibrary.com/img/200/ia-electricengineer02inte-308-171.webp)
