Cyclopedia of architecture, carpentry, and building : a general reference work (1912)
American Technical Society · Chicago : American Technical Society · leaf 131
it projects somewhat on eachside and gives a nailing surface for the plasterers grounds and for theinside finish. It is usually made about 2 inches thick and 5| incheswide, when the partition is composed of 4-inch studding, and thisleaves a nailing surface of f of an inch on each side. The sole… … Fig. 124. Partition Framing Showing Sole Fig. 125. Partition Framing Showing Cap floor beams of the floor above, the cap may have to be made 3 oreven 4 inches thick, and some architects favor the use of hard woodsuch as Georgia pine for the partition caps. The cap is shown at A,Fig. 125. Bridging.…
Architecture · Building
Internet Archive · Kelly Library, University of Toronto · Public Domain Mark 1.0. Free to use for anything.
