Modern moulding and pattern-making : a practical treatise upon pattern-shop and foundry work, embracing the moulding of pulleys, spur gears, worm gears, balance-wheels, stationary-engine and locomotive cylinders, globe valves, tool work, mining machinery, screw-propellers, pattern-shop machinery, and the latest improvements in English and American cupolas (1885)
Mullin, Joseph P · New York : D. Van Nostrand · leaf 92
74 MODERN MOULDING AND PATTERN-MAKING. As will be seen by the drawing, the cylinder is made in two sections; the inside or liner — which is sur- rounded by a water-jacket — being a separate casting turned and fitted to the body, the joints being made at the belts A. The outside, or body of the… … Fig, 71. for a sediment door cast in the bottom, which is after- ward covered with a plate, as shown at Fig. 70. The pattern for the inside or liner is shown at Fig. 72. It has two draw-irons on the top end, as shown at U; and the bottom flange and K print are made loose at the dotted line F.
Founding · Patternmaking
Internet Archive · Getty Research Institute · Public domain (published before 1931). Free to use for anything.
![An illustration from [Electric engineering.] (1902)](https://img.insideoutlibrary.com/img/200/ia-electricengineer02inte-119-32.webp)
