Mechanics of engineering (solids) : comprising statics and kinetics of solids, and the mechanics of the materials of construction, or strength and elasticity of beams, columns, shafts, arches, etc. : for use in technical schools (1911)
Church, Irving P. (Irving Porter), 1851-1931 · New York : Wiley ; London : Chapman & Hall · leaf 549
e 8 233, putting / —^ bh in eq. (4). were parallelopipedical. In other words, the present girdeiis only half as stiff as the prismatic one. 292. Special Problem. (I.) The symmetrical beam^in Fig.294 is of rectangular cross-section and constant width = 6. S46 APPENDIX. but the height is constant… … FlQ. 294. of the tipper and lower surfaces wovM meet over the supports(as should be the case to make h=-2h^. Neglecting theweight of the beam, and placing a single load in middle, itis required to find the equation for safe loading; also theequations of the four elastic curves; and finally the…
Mechanics, Applied · Strength of materials
Internet Archive · Cornell University Library · Public Domain Mark 1.0. Free to use for anything.
