A treatise on architecture and building construction (1899)
International Correspondence Schools · Scranton, The Colliery engineer co. · leaf 557
x face of the bentpiece near each edge, tend to strengthen the work materially. 76 JOINERY. 10 The ribs of the center shown in Fig. 54 are in four parts,with bracing pieces nailed over each joint as shown, 88. Bending by backing a veneei* is the third method,shown in Fig. 55. Enough wood is planed… … Fig. 55, out as required by fitting and gluing on the back of theveneer the cylindrical-faced staves v, 7, 7, etc. These stavesare made a little long, and each one, after being fitted andglued, has a long screw driven through its thickness to thecenter, near each end, to hold it down and keep it in…
Architecture · Building
Internet Archive · New York Public Library · Public Domain Mark 1.0. Free to use for anything.
